Touch Monitors

13.3-Inch 1000-Nit Outdoor Touch Monitor for OEM Kiosk Front Panels

13.3-Inch 1000-Nit Outdoor Touch Monitor for OEM Kiosk Front Panels

Outdoor Touch Monitor for Kiosk Integration

The TDD-OFTM-BF133HO is a 13.3-inch rear-mount, bezel-free open-frame PCAP touch monitor for OEM kiosks and cabinets. It features a 1920 × 1080 active matrix TFT LCD, 1000-nit typical brightness, and an auto-dimmer. IP65 protection applies to the front face only; rear sealing, cable entry, and condensation management remain part of the enclosure design.

Key Display and Operating Facts

The 16:9 panel offers a 293.76 × 165.24 mm active area, 1000:1 contrast ratio, 16.7 million colors, and 178° total horizontal and vertical viewing angles. Actual sunlight legibility depends on the glass, bonding, and viewing conditions.

Operating temperature is −20°C to 70°C; storage is −30°C to 80°C, with the website caveat “except for some models.” Power is 100–240 VAC / 12 VDC ±5%, consuming 20 W typical, 1.5 W in sleep, and 0.5 W when off. The monitor supports 24/7 use, with 50,000 hours demonstrated MTBF and a 1-year warranty.

Mounting, Touch, and Interfaces

An aluminum front frame and steel back support kiosk integration, with 75 × 75 mm or 100 × 100 mm VESA mounting and optional flush-mount brackets with screws.

The PCAP sensor supports 10-point touch through glass up to 5 mm. Confirm the advertised AG, UV-filter, and anti-mist optical-bonding configuration, plus airflow for the listed smart fans.

VGA ×1, HDMI ×1, and USB ×1 for touch are standard; DVI ×1 and DisplayPort ×1 are optional. Optional waterproof firmware should be confirmed for wet-hand applications.

Before Selection

Verify enclosure sealing, glass compatibility, thermal performance, and required options. Front-only IP65 does not mean a fully sealed monitor, and 1000-nit typical brightness does not guarantee sunlight readability.


Product reference: TDD-OFTM-BF133HO